Download the Go Kart Sizing Chart.
Benefits of Tire Warmers
Most racers want Tire Warmers to avoid cold tire incidents and to go fast right from the green flag.
It is true that these are two clear advantages of using Tire Warmers, but there are other benefits that are equally important. A Tire Warmer provides the ability to tune and manage tires in the paddock beyond the grip offered on the opening laps:
- Go Fast from the Green Flag
- Set Hot Tire Pressures in the Pits
- Avoid “graining” tires
- Save “Heat Cycles” by keeping tire warm in between sessions
- Tires last longer
Hot rubber grips the track surface better since not only does the coefficient of friction increase, but the tire’s ability to form the track surface through “mechanical keying” is increased
Set Hot Pressures
Tires will increase in pressure about 20% on the track (ie: 10 to 12 psi) which makes a huge handling difference. CHR Tire Warmers will get your tires surface AND carcass into the proper temperature range (same as you’ll see on the track). Without Tire Warmers as many as 8-10 laps can be needed to get a tire to it’s proper “hot pressure”.
Set the Tire Warmers to the temperature you anticipate seeing on the track, allow them to “heat-soak” for about 45 minutes and set the Hot Pressure. When you hit the track, there will be minimal change. Getting your Hot Tire Pressure set on the Tire Warmers gets you going right away
Avoid “graining” tires
Take a 70 degree tire and push it hard on the track; this will increase the very outer surface of the rubber in a few laps. However the rubber 2-3 mm down is not yet warm and not as elastic. This causes the outer rubber to grip the track surface and underlying rubber to rip or tear. This graining once developed in the tire almost never goes away and basically ruins the tire. By pre-heating the rubber cold tearing is simply avoided.
Save Heat Cycles
When tires are heated & then cooled, a change occurs that can be seen, measured and felt. On some tires you can actually see a blue haze form over the tire as some “oils” migrate to the surface and oxidation occurs. On other tires one might observe much drier grayish haze depending on individual tire composition. Putting the tire though these hot to cold cycles reduces the tires grip, hardens the rubber and reduces its useful life. A tire warmer can keep tires hot or simply warm between track sessions and reduce the amount of heat cycles a tire goes through. If the tire is to see more than one track session it makes sense not to allow that tire to cool all the way to ambient; this can extend how many sessions the tire can perform at near maximum grip. By operating in this manner the tire’s grip life is increased.
Tires last longer
Taking tires from ambient temperature and bringing them to race temperature on the track may take a few minutes depending on the machine, track and driver. Aside from giving up speed during these opening laps waiting for the tire to “come in”, it is truly too fast to heat the tire in an ideal manner. For example on a 75 degree day, the driver gets the tire hot in 3-4 minutes and reaches a temperature of 165 degrees, this rise of 90 degrees in such a short time “heat shocks” the tire. Race compound tires have several “activator” chemicals in them and get set into motion with heat. Getting the tire hot quickly actually spends or wastes some of the chemicals and tires will lose grip sooner than if warmed slowly on a warmer.
Chicken Hawk Racing manufactures Tire Warmers branded for Dunlop & Bridgestone race tires and works closely with the tire engineers to ensure the ramp up of heat meets the tires needs.